Please select the type of construction.
Please select the floors to be heated by hydronics.

Please choose below the budget for this project.

  1. High end systems will feature premium WiFi boilers, hydronic buffer tanks or separators, state of the art indirect heaters, Viega Propress fittings, premium pumps, WiFi controlled electronics, checkered board plating all surfaces behind the boilers and Hydronics. System performance and efficiency and not component prices will dictate the parts selection.

  2. Reasonable budgeted systems will use soldered and threaded copper and bronze fittings, hydraulic separators, mid-range boilers and tanks, checkered board backing. More cost conscious choices will be made without sacrificing performance or quality.

  3. Budget conscious systems will come with entry level boilers and tanks, budget pumps and simplified or manual controls. Simple components, soldered copper and PEX crimp fittings. Emphasis is on costs over efficiency but no corners cut when it comes to sizing or functioning.
Please select the type of heat emitters you want to use on this project.
Please let us know if the water heater or boiler and the hydronics (pumps etc) to heat the system be located in the mechanical/furnace room?
Water heaters and boilers inside a mechanical room can also be used to heat water for domestic use. Please make your selection accordingly
If you have heat loss calculations prepared for this project please provide them now.
Do you have loop layout files prepared for this project?
Please enter your PO number if applicable
Please upload all additional files and images you have for this project. The more the better.
Please be as specific as possible telling us what it is you require to speed up the process and to avoid back and forth emailing and phone calls. Things like the exact areas to be heated, any additional information about this project that was not asked above in any of the fields.